top of page
The Bayou

Acoustic/ Electric

Handcarved headstock, sound hole covers, resonator cover and tailpiece
Snake Oil Mini Humbucker Pickup

Knurled Chrome Volume and Tone Controls

Featuring a Charles Atchison Hand Spun Resonator Cone

Walnut fretboard with Mother of Pearl inlaid fret markers
Maple neck with satin finish
25 inch scale with 20 frets
Medium nickel-silver fretwire
Steel inlay side markers
Walnut saddle
Bone nut
Strap Buttons installed
4 strings tuned to open G (GDGB)
Approximate dimensions: overall length 34 1/4”. Body: Length 11 3/4” x Width 8 ½” x Depth 4 5/8”

The Bayou

  • "The Bayou". The headstock, soundhole covers, resonator coverplate, control and jack plates, and tailpiece are all Handcarved. Other features include a custom hand-done finish, along with a Snake Oil humbucker, sealed chrome tuners, knurled chrome knobs, mother of pearl inlays, and a Charles Atchison hand spun resonator cone. 


    Special notes: The nut, bridge, and bridge saddle are purposefully NOT glued down, but rather held by string tension. This allows for future adjustments if necessary. Should you prefer higher or lower action, you can replace nut and/or bridge rods with those of a larger or smaller diameter. Also, leaving the bridge and saddle “floating” allows for intonation adjustments as needed. 
    Helpful Tip - if intonation at the 12th fret is sharp, slide the bridge slightly back toward the tailpiece until the note is in tune. Likewise, if the intonation at the 12th fret is flat, slide the bridge slightly forward toward the nut until the note is in tune. When changing strings, do so one at a time in order to maintain bridge and nut positioning. Naturally, you can contact me if you have any questions.

bottom of page